Latest gas ducting Tenders | Government gas ducting Tenders

CTN :45313371

02 Jun, 2026 NA

Multi City - West Bengal

Tender For auction sale of depot ferrous scrap - lot no. m.hf-1.exmp.f, g & i.05.2026-27.01 description -scrap steel fabrication (heavy) and miscellaneousllaneousllaneousllaneous large bulky assembles, tank gas holder and similar receptacles, miscellaneousllaneousllaneousllaneous items of steel, such as furniture, buckets iron wire utensils tin board, fire extinguishers without nf etc. (our offer) miscellaneousllaneousllaneousllaneous iron frames, ladder, location boxes, battery box, mesh, fan chamber, cut pieces of water tank, vacuum cylinder, shock absorber, dampers, mvmt duct, iron fencing, iron grill, channels angles joist, gear case and other miscellaneousllaneousllaneousllaneous heavy and bulky hf-1 items with or without little nf attachment as in the lot. materials are laying in one place at "f-2" sector, one place in between "g-7 to g-8" sector & one place at "i-5" sector. before bidding bidders are requested to inspect the lot. cutting will be allowed. loading will be done by purchaser own arrangement.

Central Government And Public Sector

CTN :45218944

26 May, 2026 NA

Raipur - Chhattisgarh

Tender For auction sale of others - released cast iron brake block, released cp filtration element, traction motor end shield, damper, traction motor duct, traction motor mesh, traction motor plate, mvrh duct, , brake beam, crank shaft, buffer, brake cylinder, crane tackle (beam), spheri block, ms angle, ms sheet pieces and other mild steel materials.

CTN :45057581

27 May, 2026 9.50 Lacs

Farrukhabad - Uttar Pradesh

Tender For corrigendum : supply of fabrication and erection work e e - places , replacing wornout runner base and installing a new runner base of cane carrier and baggage elevator and r b c , replacing wornout runner with new one of cane carrier and baggage elevator and r b c , removing wornout angle iron and t iron of the cane carrier and reinstalling it by straightening the crooked part , removing the wornout part of the suit from different places and fitting it with new one , chevron grooving of new rollers of the mill , chevron grooving of old rollers of the mill , remove the wornout partition plates of the juice box above and below the juice heater by 10 or 12 mm ms plate and install it , installing ribs at the top and bottom partitions of the juice heater , repairing save all of qurdbody , removing old wornout gutters installed at various places and installing it with new gutters , remove the old wornout save all from pan and quard and install it with new one , reinstalling the new umbrella fitted inside the pan by making a new one and removing the old one , replacement ribbon arm of the mascute receiving crystallizer , making new separator of a centrifugal machine , removing the wornout truff of the hopper and installing it with new one , making and installing new separators for continuous centrifugal machines , removing the tubes of quad juice heater and dynamic juice heater and expanding them by installing new tubes and giving their hydraulic testing satisfactory of size 42 mm , removing the tubes of pan installing new tubes and expanding them and giving hydraulic tesing with satisfactory trial of size 96 mm , removing the wornout flue gas ducting of both the boilers and installing it with newone making from new or old plates , removing the wornout front and roof plate at boiler number 1 and 2 and installing with a new plate , removing the damaged boiler damper and installing a new one , making bagasse suit and installing. , replacement of juice over flow box of clarifier , making and installing bed of motor and pumps at various places as per requirement , replacement 6 inch dia cooling pipe of sulfur furnace , removing the monitor casing of a machine from old machine and installing it and giving its a trial , making amd replacing manholes at various places , making and replacing the enternals of cather of the pan. , making and replacing the new hood of cane cutter , removing the old bottom plate of the lowest compartment of the clarifier and placing a new plate on it after placing an angle trap as per the instructions and giving a satisfactory water trial , reinstalling the stirrer of the clarifier and giving a satisfactory trial , removing the shaft of a pug mill and replacing the old bushes on both sides and fitting new ones , removing and refitting the shaft of a brown sugar magma mixer and installing with new bush , reinstalling the trufff of connecting rod of the hopper , making and installing new catcher strainer , removing the old rail line of the trolley of the unloader and fitting the new rail line satisfactorily and doing water level , reinstalling the old rail line of the unloader s bridge and fitting it and checking water level etc , removal of old and weak channels of 3 inches to 10 inches diameter installed at various places and installation of new ones as per requirement , cutting and straightening old plates installed at various places as per requirement , removal of old and wornout scrubber installed on sulfur furnace and making and replacing with 8 or 10 mm plate and making all the connections , removing the trufff plate including support corroded shell and top cover plate of the top chamber of the clarifier and fitting the new plate and giving it s a water proof trial , re-installation alignment and //bid details 2 / 47 trial of hopper driving end , making and installing the top cover of the centrifugal machine , making an arm and installing it on the shaft of pug mill , making and installing scrubber and bot

corporations/Associations/Others

CTN :45271432

03 Jun, 2026 NA

Ahmedabad - Gujarat

Tender For auction sale of power plant,battery cells,duct and ug cables,furniture items

Central Government/Public Sector

CTN :45246569

26 May, 2026 NA

Multi City - Maharashtra

Tender For auction sale of depot ferrous scrap - scrap ms racks pipes consisting of ms cupboards, battery boxes, ms bed, ms trolley, cardiac table, foot elevator, self rake, chair, oxygen trolley, stool, locker, coach cutting pieces, storage unit, benches, suction machine, suction patt, ms plates, ms patti, angle channels, angle channel, hinges, cabinet, glow sign board, gi sheet, boom, foot step, round bar, machinery items in dismantled condition, blower, ac duct, frame, drums, corroded ms materials, ms stands & miscellaneous small and big items with or without nf, ci and other attachments. note- (1) cutting allowed for easy loading purposes only at the time of delivery. location: c by 1

CTN :45236678

06 Jun, 2026 42.43 Lacs

Karimnagar - Telangana

Tender For auction sale of flat - all that the residential flat no.710 in sixth floor with a super built-up area covered by 1326 sq. feet inclusive of common areas and balconies with a valid titled to an extent of 51.00 sq. yards equivalent to 42.64 sq. meters., being the undivided and unspecified share of land in the total extent of 4883.75 sq. yards together with car parking slot area proved and marked in cellar of said apartment building complex in the name and style k.p. reddy bhavan" situated at vikasnagar locality, hanamkonda, hanumakonda district, the flat fallen within these boundaries; boundaries for flat east: open to sky, west: duct area, north: corridor and open to sky, south: duct area, boundarties for total apartment east: land belong to kuda west: 25 feet wide road, north : land belong to kuda,south : 60′-0" wide road.

Central Government/Public Sector

CTN :45220435

25 May, 2026 NA

Multi City - Gujarat

Tender For auction sale of depot ferrous scrap - 98090800 scrap released ferrous junk light weight/corroded material consist of toughened sheets, m.s./gi sheets, parts of rolling shutter, light weight cuttings, ms wires, various damaged and rusty drums filled with coaltar, dray paint, mud and dray fo if any of sort and sizes, g.i. buckets, spray cans , steel buckets baskets, signal lamps, duct, vent pcs., fencing and pipes, wire mesh, stretcher, bicycle, pan, frames, electrical fittings, t.l. fittings, grill- jali, cabinet frames, rack b allast, rusted body and parts of weighing machine, small rods angle, battery boxes, tool boxes, shovel, protective tubes, rail door handles, main door, foot plate, step plates, bench pipes, typewriter g.i. pipes, trolleys,, water tank etc. with or without m.s. attachments and with or without minor nf, wooden, rubber, plastic attachments of sorts and sizes, display boards of sorts & sizes, broken, damaged unserviceable etc.the lot is in two stacks. stack 1 is in bin 17, and stack 2 is in bin 18b. delivery of stack 1 will be given first, then stack 2

Central Government/Public Sector

CTN :45220330

25 May, 2026 NA

Multi City - Tamil Nadu

Tender For auction sale of depot ferrous scrap - cond. & u/s ferrous scrap in corroded nature such as head stock, foot steps, berth frame, engineering items such as rusted barrigaurds,ferrous pipes, grill,gate,grill,expandedmetal mesh,fabricated tool press,transformer sheets, pipes, boxes,dustbin holder,fencing scrap,bolts and nuts,false cealing patti, angles, rails adhered or separate, drum, coach cuttings, trolleys, window grills,fabricated gates,battery box in cut condition,angles, guards, dust bins, heavy nature coach parts parts in broken or full condition, pway support structures,gi sheets, pulley, frames, ferrous boxes, sign boards, roller shutters, corroded/ dinged/ damaged wagon door, zinc coated fs sheets, base plates,ms/gi sheets in full/cut/damaged/rusted/corroded/crushed condition, wagon floor sheet, coach door,sliding door of various sorts & sizes, battery boxes in cutparts,collapsible gate, punches plate/ sheet/ screen, corroded shear cutups, galvanised sheets rusted condition, roof light/tube light fitting with/without ballast, fl housing, tl patti, crushed drums, cfl frame, regulator box, ms gutter, corroded fabrication scrap, carriage fan body cover/end shield/ guard/ blade, pedestal fan guard, air brake pipes, corr. barrels/paint drums, silent block, anchor block, wires,chains,boxes,hoop iron,lamps,air filter,clips, panels, corroded gi pipes with/without valves, gi duct, ci covers/piper/joints,coach/wagon cutup parts,sheets,equalizing stay,brake anchor,round/square pipes,pipe wrench,pins, rivets, bolts, nuts, small iron pieces,heavy melting scrap,wire rope/safety rope with/without aluminium sling,box type fitting,pipes,dust bin, hood,rack,bond, hs lamp, battery charger core with iron stand or frame, iron core, fl patti & fitting of all types and sorts and sizes, fire extinguisher without cap, fan down rod, ferrous ac template, train information display system,battery tray,trough floor sheets,ferrous parts accessories released from carriage/wagon/loco rolling stocks, galvanized sheets of sorts & sizes, sand pipe,rolling shutter,gi/ms angles and channels,rails,cutmast,protectivetube, wagon/coach springs,shockabsorber, suspensionunit, equilising stay, ls beam, bolster, silent block,iron gate,clower cups,guard gril,irongrill,springs,pins, heavy melting scrap,ac duct,gi ipes,ladders and all the above items are of various sorts and sizes in full/cut/broken/damaged and with/without wooden/glass/ rubber/ fs end fittings with /without minor non ferrous attachments if any in as is where is condition. pl.no. 98090800. custodian: cdms-rsf-gsd-per. note: 1) cutting is permitted to lorry loadable size only. 2) if any non-ferrous materials found should be handed over to custodian.3) jcb/crane loading is permitted. location: arumugham yard bin c

corporations/Associations/Others

CTN :45178613

03 Jun, 2026 NA

Nashik - Maharashtra

Tender For supply of two way switch 22pt5 mm size , oil burner sequence controller obsc , flow meter for flue gas ducting obsc , pneumatic flow control valve , temp controller 96 x 96 , temp indicator 96 x 96 , main switch 32 amp , ignition transformer 12000 volts , ignition transformer mounting box for oil , thermocouple k type 600 degree c , thermocouple k type 1200 degree c , k type thermocouple , photo cell steel body l d r 20mm , ignition rod 300 x 10mm , ignition rod 250mm x 8mm , ignition rod connector push type plug , burner cable connector 2x2 way ceramic , id fan belt drive ss304 , fd fan direct drive ms2062 , auto burner primary chamber 1pt35 , auto burner secondary chamber 1pt0

corporations/Associations/Others

CTN :45155950

18 May, 2026 NA

Gurgaon - Haryana

Tender For auction sale of tag blocks (250 units) line side,computer with monitor (with lcd-01, with crt-09) & one laptop,pijf duct cable (800 pair)-62 meter, as is where is basis,mlln modem (stu-160, mlln modem (cte2 sb 35,dslam rack (3 rack) with 50 cards,400 ah amara raja make 24 cell,power plant exicom with two modules, etc,mix iron scrap 700 kg,vrla battery 200 ah one set hbl make,recovered duct pijf cable 400 pairs 140 meter, etc,vrla battery 600 ah 24 cells ned make, etc,vrla battery 600 ah one set exide make, etc,iron scrap 1000 kg,copper cable 50 pairs,copper cable 100 pairs

Gas Ducting Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government And Public Sector

corporations/Associations/Others

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector

corporations/Associations/Others

corporations/Associations/Others